Description
Specifically designed for Intex swimming pools, compatible with all pools that have a pump.
Electric swimming pool heaters must be connected to the same electrical circuit as the filter pump. This way the heater cannot heat when there is no flow-through. The heater must always remain full of water. Install an electric heater on the pressure side of the pump, never on the suction side.
Heating
As the largest worldwide manufacturer of above-ground pools, Intex now conquers the market with this easy to use, inexpensive and efficient electric swimming pool heater. This heater is suitable for pools up to 457 cm in diameter and heats the water to a maximum of 35°C. Or you can use the Intex electric heater as additional heating for larger pools. The temperature of a pool of 10 m³ rises ± 0.25°C per hour with this heater. For a pool of 10 m³ this will take 2 hours.
Installation
The installation is very simple. Place the electric heater after the filter pump with the included accessories, plug it in and press the reset button on the plug. With a twist of the button your pool starts to heat. The Intex pool heater uses connections of 32 mm and is simply plugged in to the electric outlet (220-240 Volts).
Safety
Thanks to the different built-in safety systems you will enjoy this heater for many years. The built-in flow sensor ensures that the heat pump doesn't switch on when the water level is too low. The safety plug interrupts the power supply when a problem occurs in the electrical circuit. The thermostat protects the Intex pool heater against overheating. The built-in tilt sensor switches this pool heater off automatically when it falls over.
Inclusive
- Heater 3 kW with RCD plug
- 1 connection hose of 155 cm with a diameter of 32 mm
- Thermometer
- Built-in thermostat
-
Tension rings.
Product Features
- For 8' - 12' (2.44m - 3.66m) above ground pools
- Take the chill off your pool
- Only suitable for use with round Easy Set or Metal Frame pools
- Easy to connect up to your pool
- 230V Electrical Heater
